Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Jeremy-

Modifica approvata da Jeremy

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Remove the black and white cables on the wireless card using the tweezers by pulling upward.
[* bluered] While tracing the path of the black and white cables back to the display, unhook the cablse from the tabs of the body using the spudger. Both wires need to be completely out of all the tabs, loose and unattached.
[* bluered] While tracing the path of the black and white cables back to the display, unhook the cablse from the tabs of the body using the spudger. Both wires need to be completely out of all the tabs, loose and unattached.

Immagine 1

Vecchia Versione

Nuova Versione