Aggiusta le tue cose Community Store

Modifiche a questo Step

Modifica di Javier Guillen —

Modifica approvata da Javier Guillen

Prima di
Dopo il
Invariato

Righe Passo

-[* black] Now that all 10 of the screws that hold together the keyboard panel are removed, we can lift the laptop screen and flip it around so that the keyboard is facing up.
+[* black] Now that all 10 of the screws that hold together the keyboard panel are removed, we can lift open the laptop screen and flip it around so that the keyboard is facing up.
[* black] Grab your plastic opening tool and press it into one of the corners as shown in the image.
-[* black] You want to guide the plastic tool around the perimeter of the panel to remove all the clips that are supporting it in place. See next image. Please note, it is important to not pull the panel off by one corner as it can cause damage.
-[* black] Once you have gone around the perimeter to remove the clips, the keyboard panel should detach from the frame as shown in the picture. Please note, there are 2 ribbon cables attached to the keyboard and trackpad so DO NOT pull the keyboard panel away until you disconnect these ribbons.
+[* icon_caution] Guide the plastic tool around the perimeter of the panel to remove all the clips that are supporting it in place. See next image. Please note: it is important to not pull the panel off by one corner as it can cause damage to the plastic.
+[* icon_caution] The keyboard panel should now detach from the frame as shown in the picture. Please note: there are 2 ribbon cables attached to the keyboard and trackpad so DO NOT pull the keyboard panel away until you disconnect these ribbons shown in the next step.