Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Austin Blakely-

Modifica approvata da Austin Blakely

Prima di
Dopo il
Invariato

Righe Passo

-[* red] Use a Phillips #0 Screwdriver to unscrew the eight 4mm screws.
-[* orange] Use a Phillips #0 Screwdriver to unscrew the two 7mm screws and then remove the cover.
-[* icon_note] iFixIt's magnetic project mat is great for keeping the screws organized.
-[* black] If the back cover is hard to remove, use a plastic opening tool to remove the back cover.
+[* red] Use a Phillips #0 screwdriver to unscrew the eight 4mm screws.
+[* orange] Use a Phillips #0 screwdriver to unscrew the two 7mm screws.
+[* icon_note] iFixit's magnetic project mat is great for keeping the screws organized.
+[* black] Remove the cover of the device by prying up from one of the edges with a spudger or plastic opening tool.
+ [* icon_note] If the back cover is hard to remove, carefully use a metal spudger to remove the back cover.