Modifiche al passo #2
Righe Passo
[title] Open the enclosure |
[* black] Take the flathead screwdriver. |
[* red] Insert it into the slot located at the bottom of the handle and turn counterclockwise to release the bottom cap. |
[* black] The second image shows the amount of turning needed to loosen the bottom cap. |
[* icon_caution] Be careful with this as the plastic is not very solid. Deforming the material could result in issues when placing the device onto the charging station. |
[* black] Hold the handle upside down, and push down on the shaft to release the internal components of the handle. |
Immagine 2
Vecchia Versione
Nuova Versione
Immagine 3
Nessuna immagine precedente.
Aggiunto