Modifiche al passo #3
Modifica di John O’Connell —
Modifica approvata da John O’Connell
- Prima di
- Dopo il
- Invariato
Righe Passo
| [* black] Inside, you will see the drive. | |
| - | [* red] Remove the one screw holding the drive in place. |
| - | [* orange] Pull the tab in the direction where the screw you just removed was. This should slide the drive in that direction. |
| + | [* black] The drive is connected to a tab on the on the right side, grab the drive and slide it to the left so that it is no longer connected to the tab. |
| [* black] After the drive has slid out of its connector, you may now pull the drive directly up and out of the laptop. |