Salta al contenuto principale

Modifiche al passo #5

Modifica in base a Ryan Marando-

Modifica approvata da Ryan Marando

Prima di
Dopo il
Invariato

Righe Passo

[* black] Use wire cutters to cut and separate wires from charging port.
[* black] Discard old charging port and replace with new one.
- [* black] Available for purchase on Dirt Devil or Amazon.
[* black] Strip wires and solder to new charging port as they were to the pervious port.
- [* icon_note] Solder instructions on troubleshooting page.
+ [* icon_note] Check out [guide|750|How To Solder and Desolder Connections]!