Salta al contenuto principale

Modifiche al passo #9

Modifica in base a Walter Galan-

Modifica approvata da Walter Galan

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Insert wisdom hereGently push the edges of the display data cable connector away from its socket on the logic board.
[* icon_note] It is recommended "walk" the connector out of its socket. Simply push the top and bottom corners of the connector and carefully "walk it out" of its socket.
[* black] Pull, but do not remove, the display data cable connector out of its socket and carefully move it out of the way
.
[* black] Insert wisdom hereGently push the edges of the display data cable connector away from its socket on the logic board.
[* icon_note] It is recommended "walk" the connector out of its socket. Simply push the top and bottom corners of the connector and carefully "walk it out" of its socket.
[* black] Pull, but do not remove, the display data cable connector out of its socket and carefully move it out of the way
.

Immagine 1

Vecchia Versione

Nuova Versione