Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Austin Blakely-

Modifica approvata da Austin Blakely

Prima di
Dopo il
Invariato

Righe Passo

-[* red] Using the flat end of the #3 Plastic Spudger, pry up the two rubber feet on the top of the laptop's back cover.
-[* orange] Using a #0 Phillips-head screwdriver, remove the 8 mm Phillips-head screw under each of the rubber feet.
+[* red] Using the flat end of the Spudger, pry up the two rubber feet on the top of the laptop's back cover.
+[* orange] Using a #0 Phillips-head screwdriver, remove the 8 mm screw under each of the rubber feet.