Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Austin Blakely-

Modifica approvata da Austin Blakely

Prima di
Dopo il
Invariato

Righe Passo

-[* red] Using a #0 Phillips-head screwdriver, remove the three 5 mm Phillips-head screws along the bottom of the back cover.
-[* orange] Using a #0 Phillips-head screwdriver, remove the 6 mm Phillips-head screw at the top of the back cover.
+[* red] Using a #0 Phillips-head screwdriver, remove the three 5 mm screws along the bottom of the back cover.
+[* orange] Using a #0 Phillips-head screwdriver, remove the 6 mm screw at the top of the back cover.