Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Caleb Murray-

Modifica approvata da Caleb Murray

Prima di
Dopo il
Invariato

Righe Passo

-[* red] Using a #0 Phillips head screwdriver, remove the three 5 mm Phillips head screws along the bottom of the back cover.
-[* orange] Using a #0 Phillips head screwdriver, remove the 6 millimeter Phillips head screw at the top of the back cover.
+[* red] Using a #0 Phillips-head Screwdriver, remove the three 5 mm Phillips-head screws along the bottom of the back cover.
+[* orange] Using a #0 Phillips-head Screwdriver, remove the 6 millimeter Phillips-head screw at the top of the back cover.