Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Caleb Murray-

Modifica approvata da Caleb Murray

Prima di
Dopo il
Invariato

Righe Passo

-[* black] Using a Phillips head screw driver, remove the three 5 mm Phillips head screws along the bottom of the back cover.
-[* black] Using a Phillips head screw driver, remove the 6 millimeter Phillips head screw at the top of the back cover.
+[* red] Using a #0 Phillips head screwdriver, remove the three 5 mm Phillips head screws along the bottom of the back cover.
+[* orange] Using a #0 Phillips head screwdriver, remove the 6 millimeter Phillips head screw at the top of the back cover.

Immagine 1

Vecchia Versione

Nuova Versione