Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Aaron Jacob-

Modifica approvata da Walter Galan

Prima di
Dopo il
Invariato

Righe Passo

-[* icon_note] With the case and battery removed from the mid frame, begin removing all cables plugged into mid board.
-[* icon_note] Place the device so the mid frame's backside faces up. Start with the cable on the bottom left corner.
+[* icon_note] With the case and battery removed from the midframe, begin removing all cables attached into the motherboard.
+[* icon_note] Place the device so the midframe's backside faces up. Start with the cable on the bottom left corner.
[* black] Use a spudger to lift up the white locking cable tensioner and slide the flex cable out.
[* black] Proceed counterclockwise to the next cable and repeat.