Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Alec Boyer-

Modifica approvata da Alec Boyer

Prima di
Dopo il
Invariato

Righe Passo

-[* icon_note] With the case and battery removed from the Mid-Board, begin removing all cables plugged into Mid-Board.
-[* icon_note] Place the device such that the backside of the Mid-Board faces up. Start with the Cable on the bottom left corner.
+[* icon_note] With the case and battery removed from the mid board, begin removing all cables plugged into mid board.
+[* icon_note] Place the device such that the backside of the mid board faces up. Start with the Cable on the bottom left corner.
[* black] Use a flat pry tool to lift up the white locking cable tensioner and slide flex cable out.
[* black] Proceed counterclockwise to the next cable and repeat.