Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Kyle Kern-

Modifica approvata da Kyle Kern

Prima di
Dopo il
Invariato

Righe Passo

-[* icon_note] With the case and battery removed from the Mid-Board begin removing all cables plugged into Mid-Board.
-[* icon_note] The backside of the Mid-Board facing up. Start with the Cable on the bottom left corner.
-[* black] Use a flat pry tool to lift up white locking cable tensioner and slide flex cable out.
-[* black] Proceed to the next closest small cable and repeat.
+[* icon_note] With the case and battery removed from the Mid-Board, begin removing all cables plugged into Mid-Board.
+[* icon_note] Place the device such that the backside of the Mid-Board faces up. Start with the Cable on the bottom left corner.
+[* black] Use a flat pry tool to lift up the white locking cable tensioner and slide flex cable out.
+[* black] Proceed counterclockwise to the next cable and repeat.