Skip to main content

Modifiche al passo #2

Modifica in base a David Zhuo-

Modifica approvata da David Zhuo

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] When the lid is removed from the RAM Modulemodule compartment, you should see several sticks of RAM.
[* red] Remove these RAM sticksmodules by pushing the metal tabs outward (located on the sides of the modules) so that the sticks popRAM pops up.
[* icon_caution] '''When pulling the sticksmodules out, do not yank the sticksthem with too much force! You don't want to break your RAM.'''
[* black] Replace the RAM module by sliding it into the angled socket.
[* black] Once securely inserted, gently apply downward pressure until the metal tabs on the sides click into place.
[* black] When the lid is removed from the RAM Modulemodule compartment, you should see several sticks of RAM.
[* red] Remove these RAM sticksmodules by pushing the metal tabs outward (located on the sides of the modules) so that the sticks popRAM pops up.
[* icon_caution] '''When pulling the sticksmodules out, do not yank the sticksthem with too much force! You don't want to break your RAM.'''
[* black] Replace the RAM module by sliding it into the angled socket.
[* black] Once securely inserted, gently apply downward pressure until the metal tabs on the sides click into place.