Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Brandon Kirklen-

Modifica approvata da Brandon Kirklen

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Carefully lift the fan and heat sink assembly.
[* black] Detach the fan power cable from the motherboard with your fingers by squeezing the sideswhite plastic connector and wiggling gently from side to side.
[* black] Detach the fan power cable from the motherboard with your fingers by squeezing the sideswhite plastic connector and wiggling gently from side to side.
[* violet] There will be a grey goop between the copper heat piping and the back of the processor, (indicated in pink). This is thermal paste and allows heat to flow properly.
[* icon_note] After removing the existing fan, be sure [* icon_reminder] Be sure to replace any missing thermal paste before reassembling your laptopwhen installing the new fan.
[* icon_note] After removing the existing fan, be sure [* icon_reminder] Be sure to replace any missing thermal paste before reassembling your laptopwhen installing the new fan.

Immagine 1

Vecchia Versione

Nuova Versione