Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Cory-

Modifica approvata da Cory

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Carefully lift the fan and heat sink assembly.
[* black] Detach the power cable with your fingers by squeezing the sides and wiggling gently from side to side.
[* black] Carefully lift the fan and heat sink assembly.
[* black] Detach the power cable with your fingers by squeezing the sides and wiggling gently from side to side.
[* violet] There will be a grey goop between the copper heat piping and the back of the processor, (indicated in pink). This is thermal paste and allows heat to flow properly.
[*[* icon_note] After removing the existing fan, be sure to replace any missing thermal paste before reassembling your laptop.
[* black] Disconnect the power cord leading to the fan from the motherboard.
[*[* icon_note] After removing the existing fan, be sure to replace any missing thermal paste before reassembling your laptop.
[* black] Disconnect the power cord leading to the fan from the motherboard.

Immagine 1

Vecchia Versione

Nuova Versione