Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Brandon Kirklen-

Modifica approvata da Brandon Kirklen

Eliminato
Aggiunto
Invariato

Righe Passo

[* black]red] Locate and remove the heat sink mounting screws using a #1 Phillips Screwdriver.
[* icon_note] These screws will be tight as they hold a critical component onto the processor. You may need to use a little extra elbow grease to remove them.
[* black]red] Locate and remove the heat sink mounting screws using a #1 Phillips Screwdriver.
[* icon_note] These screws will be tight as they hold a critical component onto the processor. You may need to use a little extra elbow grease to remove them.

Immagine 1

Vecchia Versione

Nuova Versione