Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #9

Modifica in base a Phryne-

Modifica approvata da Phryne

Prima di
Dopo il
Invariato

Righe Passo

[title] Glass Lens+OLED Screen Laminating
[* black] Place the OLED screen into the OLED aligning mold. Clean the screen with the lint-free wiper. Tear off another layer of the OCA protective film and attachAttach the OCA attached glass lens to the right position of the screen.
[* black] Press gently to fit the glass lens with the screen. Place the mold upside down and take out the OLED Screen Assembly. Tear off the protective film on the glass lens.
[* black] Cover the backside of the OLED Screen Assembly with a laminating sponge and then place
the OLED Screen Assembly into the laminating machine. Choose ‘start’ on the LED panel. The machine starts to work. Laminating finished after several minutes.
[* black] Place the OLED screen into the OLED aligning mold. Clean the screen with the lint-free wiper. Tear off another layer of the OCA protective film and attachAttach the OCA attached glass lens to the right position of the screen.
[* black] Press gently to fit the glass lens with the screen. Place the mold upside down and take out the OLED Screen Assembly. Tear off the protective film on the glass lens.
[* black] Cover the backside of the OLED Screen Assembly with a laminating sponge and then place
the OLED Screen Assembly into the laminating machine. Choose ‘start’ on the LED panel. The machine starts to work. Laminating finished after several minutes.