Modifiche al passo #1
Modifica di Arthur Shi —
Modifica approvata da Arthur Shi
- Prima di
- Dopo il
- Invariato
Righe Passo
| [title] Determine the unloader assembly | |
| - | [* icon_note] Before you begin, be sure that the engine is powered off and is cool to the touch. |
| [* black] ***There are two versions of the unloader assembly: *** | |
| [* black] First image—earlier pressure washers feature an all-in-one assembly (part 8-0631) that’s easy to replace, but gave users the ability to break the pump. | |
| [* black] Second image—later models use a tamper-proof, harder to remove unloader (part 8-0656), connected by a series of pipe fittings. | |
| [* icon_note] This guide is written for the tamper-proof unloader assembly. | |
| [* red] If you need to remove an all-in-one style unloader, use a large adjustable wrench to unscrew the two large Banjo bolts. This will disconnect the unloader from the pump assembly. |