Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Joe-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] Remove the following four connections:
[* blue] Two ribbon cables -- flip up latch and remove horizontally.
- [* violet] One wire clamp -- use a PSP opening tool to pry it up vertically.
+ [* violet] One wire clamp -- use an opening tool to pry it up vertically.
[* green] One wiring harness -- use your fingers, a PSP opening tool, or tweezers to disconnect the connector horizontally.
-[* icon_caution] The ribbon cable near the wire clamp has a brown tab that should be lifted using a PSP opening tool prior to removal. Be careful to not damage the ribbon or connector.
+[* icon_caution] The ribbon cable near the wire clamp has a brown tab that should be lifted using an opening tool prior to removal. Be careful to not damage the ribbon or connector.