Modifiche al passo #13
Modifica di Ryan Dionne —
Modifica approvata da Ryan Dionne
- Prima di
- Dopo il
- Invariato
Righe Passo
| - | [* red] Adjust the front 1.5 mm flat head prism screws with small turns. |
|---|---|
| + | [* red] Adjust the two front 1.5 mm flat head prism screws with small turns. |
| [* black] Look through the binoculars after each adjustment to see if it is aligning the vision, and repeat the adjustments until it is repaired. | |
| [* icon_note] You may need to return to Step 8 to fine-tune the other set of screws. All four prism adjustment screws must be in their correct positions to produce the correct view through the binoculars. |