Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Forrest Lipske-

Modifica approvata da Forrest Lipske

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Pry the case off using a pryingplastic opening tool.
[* red] Continue working the pryplastic opening tool around the sides of the device, unhooking the eight tabs securing the back cover to the rest of the phone as shown in the second photo.
[* yellow] The back speaker will be connected to the motherboard, and must be disconnected with the spudger to remove the case.
[* black] Pry the case off using a pryingplastic opening tool.
[* red] Continue working the pryplastic opening tool around the sides of the device, unhooking the eight tabs securing the back cover to the rest of the phone as shown in the second photo.
[* yellow] The back speaker will be connected to the motherboard, and must be disconnected with the spudger to remove the case.