Modifiche al passo #4
Modifica di Martin Hampton —
Modifica approvata da Martin Hampton
- Prima di
- Dopo il
- Invariato
Righe Passo
| + | [title] Replace the spokes |
|---|---|
| + | [* black] Remove all the old spokes from your wheel |
| + | [* black] Spoke the 8 speed gear into the wheel. This is the best guide https://www.youtube.com/watch?v=mIU6mi0K4Y4 |
| + | [* black] Tighten all the spokes using a screwdriver. Use the same torque on the screwdriver and check by "plucking" the spokes so the sound the same |
| + | [* black] Turn the bike upside down, install the wheel, and true the wheel. I hold a screw driver against the frame and slowly spin the wheel. When it move in, I just tighten the opposite spokes |
Immagine 1
Nessuna immagine precedente.
Aggiunto
Immagine 2
Nessuna immagine precedente.
Aggiunto