Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche a questo Step

Modifica in base a graymond6-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] Use spludgeriPod opening tool to lift off/flip up the black plastic flap where the ribbon connects to the circuit board. Slide out ribbon from circuit board and set circuit board aside. (Board will still be connected to the device via the copper cable and an auxiliary black cable)
[* black] Use spludgeriPod opening tool to lift off/flip up the black plastic flap where the ribbon connects to the circuit board. Slide out ribbon from circuit board and set circuit board aside. (Board will still be connected to the device via the copper cable and an auxiliary black cable)