Modifiche al passo #2
Righe Passo
| [title] Free the keyboard | |
| [* icon_caution] I recommend to use the ***iFixit Opening Picks*** for this step! Otherwise you could scratch/damage the keyboard or frame by metal on metal! | |
| [* black] Place it between the keyboard and the frame. I started near the on/off button to make a opening. | |
| [* black] Just go around the whole keyboard with the opening picks, slide it through every side of the keyboard, except for the under side (there are no clips there). | |
| - | [* black] Just free all the clips, you should hear some pops. ***Do not pull the keyboard out, just free it from the clips which are holding the keyboard.*** |
| + | [* black] Just free all the clips, you should hear some pops. ***Do not pull the keyboard out, just free it from the clips which are holding the keyboard.*** The clips that are holding the keyboard are pretty strong, so you need a little force to free it. |
| [* black] After it's freed from all the clips, you can turn the keyboard towards your self. ***Do not remove the keyboard as it's still connected with some ribbon cables!*** |