Modifiche al passo #5
Modifica in base a Shashwat Patra-
Modifica approvata da Shashwat Patra
- Prima di
- Dopo il
- Invariato
Righe Passo
| [* black] Solder the wires to poles on the jack as outlined in the steps below. Poles are shown in the first picture |
| [* black] Solder the wires to poles on the jack as outlined in the steps below. Poles are shown in the first picture |
| [* red] The first pole (Marked with the red box) is grounded. Solder on the green-gold, red-gold, and red-green wires. The third picture refers to this step. |
| [* orange] The second pole (Marked with the orange box) is for the right earbud. Solder on the red wire. |
| [* yellow] The third pole (Marked with the yellow box) is for the left earbud. Solder on the green wire. |
| [* green] Finally, the fourth pole (Marked with the green box) that is not connected to the rest is for the mic. Solder on the gold wire. |
Immagine 1
Vecchia Versione
Nuova Versione