Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #5

Modifica in base a Shashwat Patra-

Modifica approvata da Shashwat Patra

Prima di
Dopo il
Invariato

Righe Passo

[* black] Solder the wires to poles on the jack. Each color on the jack matches withas outlined in the steps below. Poles are shown in the first picture in the same color on the wiresboxes.
[* blackred] The first pole (Marked with the greenred box) is grounded. Solder on the green-gold, red-gold, and red-green wires. The third picture refers to this step.
[* blackorange] The second pole (Marked with the yelloworange box) is for the right earbud. Solder on the red wire.
[* blackyellow] The third pole (Marked with the orangeyellow box) is for the left earbud. Solder on the green wire.
[* blackgreen] Finally, the fourth pole (Marked with the redgreen box) that is not connected to the rest is for the mic. Solder on the gold wire.
[* black] Solder the wires to poles on the jack. Each color on the jack matches withas outlined in the steps below. Poles are shown in the first picture in the same color on the wiresboxes.
[* blackred] The first pole (Marked with the greenred box) is grounded. Solder on the green-gold, red-gold, and red-green wires. The third picture refers to this step.
[* blackorange] The second pole (Marked with the yelloworange box) is for the right earbud. Solder on the red wire.
[* blackyellow] The third pole (Marked with the orangeyellow box) is for the left earbud. Solder on the green wire.
[* blackgreen] Finally, the fourth pole (Marked with the redgreen box) that is not connected to the rest is for the mic. Solder on the gold wire.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione