Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #2

Modifica in base a Walter Galan-

Modifica approvata da Walter Galan

Prima di
Dopo il
Invariato

Righe Passo

[* icon_noteicon_reminder] The LCD is still connected to the rest of the iPad by two wide strips of adhesive tape that run up from the inside of the rear case to the front bottom LCD frame.
[* icon_noteicon_reminder] The LCD is still connected to the rest of the iPad by two wide strips of adhesive tape that run up from the inside of the rear case to the front bottom LCD frame.
[* black] While holding the LCD with one hand, insert the flat end of a spudger between the LCD and tape on the iPad's right side.
[* black] Slide the spudger outward, separating the tape, while gently lifting up on the LCD to pull it away from the tape.
[*[* icon_note] It may help to twist the spudger, to spread the gap the rest of the way and separate the LCD from the tape.
[*[* icon_note] It may help to twist the spudger, to spread the gap the rest of the way and separate the LCD from the tape.