Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #1

Modifica in base a Andrew Optimus Goldheart-

Modifica approvata da Andrew Optimus Goldheart

Prima di
Dopo il
Invariato

Righe Passo

[* black] Use a plastic opening tool to pry the LCD connector from its socket on the logic board.
[* icon_caution] Do not pry against the large IC next to the connector, or you may break it. PryGently pry from the side of the connector as shown.
[* icon_caution] Do not pry against the large IC next to the connector, or you may break it. PryGently pry from the side of the connector as shown.