Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #1

Modifica in base a Walter Galan-

Modifica approvata da Walter Galan

Prima di
Dopo il
Invariato

Righe Passo

[* red] Remove the three 1.3 mm Phillips #00 screws securing the connector shield to the logic board.
[* black] On reassembly, beicon_caution] Be sure not to not substitute these three screws forwith any other screws, specifically the similar screws used to attachsecuring the large LCD shield. Thoseshield plate to the rear case of the iPad. Any slightly longer screws will breakmay strip the screw bracketsholes and result in irreparable damage to the motherboardlogic board.
[* black] On reassembly, beicon_caution] Be sure not to not substitute these three screws forwith any other screws, specifically the similar screws used to attachsecuring the large LCD shield. Thoseshield plate to the rear case of the iPad. Any slightly longer screws will breakmay strip the screw bracketsholes and result in irreparable damage to the motherboardlogic board.