Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #24

Modifica in base a Andrew Optimus Goldheart-

Modifica approvata da Andrew Optimus Goldheart

Prima di
Dopo il
Invariato

Righe Passo

[* black] Lifticon_caution] Be very careful with this step. Take your time and ensure the front panel glass fromadhesive is hot and soft, and that you've been through all of the top, folding it upadhesive with an opening pick. Don't be afraid to stop and overreheat.
[* black] At
the iPad.
[* icon_caution] Do not remove
top of the front panel fromiPad opposite the rest ofhome button, you should have a pick lodged into each corner. Twist the iPad;picks to lift the digitizer cable still connectsglass slightly, separating the two.
[* icon_note
last of the adhesive along all four edges.
[* icon_caution
] If your digitizer is cracked and you do not wish to use it anymore, then cutencounter a significant amount of resistance, stop twisting. Leave the digitizer cablepicks in place, reheat, and reapply the iOpener to free some space to work upthe problem areas, and run a pick through the sticking point one more time.
[* black] Lifticon_caution] Be very careful with this step. Take your time and ensure the front panel glass fromadhesive is hot and soft, and that you've been through all of the top, folding it upadhesive with an opening pick. Don't be afraid to stop and overreheat.
[* black] At
the iPad.
[* icon_caution] Do not remove
top of the front panel fromiPad opposite the rest ofhome button, you should have a pick lodged into each corner. Twist the iPad;picks to lift the digitizer cable still connectsglass slightly, separating the two.
[* icon_note
last of the adhesive along all four edges.
[* icon_caution
] If your digitizer is cracked and you do not wish to use it anymore, then cutencounter a significant amount of resistance, stop twisting. Leave the digitizer cablepicks in place, reheat, and reapply the iOpener to free some space to work upthe problem areas, and run a pick through the sticking point one more time.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione