Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #21

Modifica in base a Andrew Optimus Goldheart-

Modifica approvata da Andrew Optimus Goldheart

Prima di
Dopo il
Invariato

Righe Passo

[* icon_note] Leave the pick from the last step in place to prevent the adhesive from re-sealing.
[*
black] SlideWith a new pick, slice gently over the plastic opening tool aroundleft-hand antenna, stopping before the home button.
[* icon_caution] Only slide the pick from the outer edge toward the center of the iPad. Do not move the pick back toward the outer edge, as moving in this direction may damage the antenna.
[* icon_note] If you need to slide the pick over the lower section more than once, remove it and re-insert at the outer edge, and slide inwards.
[* black] Leave
the iPad's top right cornerpick in place before moving on.
[* icon_note] Leave the pick from the last step in place to prevent the adhesive from re-sealing.
[*
black] SlideWith a new pick, slice gently over the plastic opening tool aroundleft-hand antenna, stopping before the home button.
[* icon_caution] Only slide the pick from the outer edge toward the center of the iPad. Do not move the pick back toward the outer edge, as moving in this direction may damage the antenna.
[* icon_note] If you need to slide the pick over the lower section more than once, remove it and re-insert at the outer edge, and slide inwards.
[* black] Leave
the iPad's top right cornerpick in place before moving on.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione

Immagine 3

Nessuna immagine precedente.

Aggiunto