Skip to main content

Modifiche al passo #19

Modifica in base a Andrew Optimus Goldheart-

Modifica approvata da Andrew Optimus Goldheart

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Slide the plasticLeave the opening tool alongpicks in place and reheat the top edge, separatingiOpener.
[* icon_caution] Remember not to overheat
the edge of the front panel from the rear caseiOpener—no more than once every two minutes.
[* black] LeaveSet the plastic opening tool inreheated iOpener on the gaphome button end of the iPad and let it rest for a few minutes to soften the adhesive beneath the front panel, near the iPad's top right cornerglass.
[* black] Slide the plasticLeave the opening tool alongpicks in place and reheat the top edge, separatingiOpener.
[* icon_caution] Remember not to overheat
the edge of the front panel from the rear caseiOpener—no more than once every two minutes.
[* black] LeaveSet the plastic opening tool inreheated iOpener on the gaphome button end of the iPad and let it rest for a few minutes to soften the adhesive beneath the front panel, near the iPad's top right cornerglass.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Eliminato

Immagine 3

Eliminato