Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #13

Modifica in base a Andrew Optimus Goldheart-

Modifica approvata da Andrew Optimus Goldheart

Prima di
Dopo il
Invariato

Righe Passo

[* black] Insert another guitar pick underLeave the bottom left corner ofopening pick in the front panel, breakingiPad slightly past the adhesive beneath it.
[*
front-facing camera.
[*
icon_note] If the guitarTake a second pick is hardand insert it to press in, reheat the iOpener for 30 seconds and reapplyleft of the camera, where the first pick just was. Slide it back to the iPad for another 90 secondscorner to re-soften thecompletely cut any remaining adhesive.
[* black] SlideLeave the guitarsecond pick toward the home button, breaking the adhesive beneath.
[* icon_caution] For this pick, be sure to only slide toward the center,
in place to prevent damage to the Wi-Fi antenna, located beneath the lower bezelcorner adhesive from re-sealing as it cools.
[* black] Insert another guitar pick underLeave the bottom left corner ofopening pick in the front panel, breakingiPad slightly past the adhesive beneath it.
[*
front-facing camera.
[*
icon_note] If the guitarTake a second pick is hardand insert it to press in, reheat the iOpener for 30 seconds and reapplyleft of the camera, where the first pick just was. Slide it back to the iPad for another 90 secondscorner to re-soften thecompletely cut any remaining adhesive.
[* black] SlideLeave the guitarsecond pick toward the home button, breaking the adhesive beneath.
[* icon_caution] For this pick, be sure to only slide toward the center,
in place to prevent damage to the Wi-Fi antenna, located beneath the lower bezelcorner adhesive from re-sealing as it cools.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione

Immagine 3

Nessuna immagine precedente.

Aggiunto