Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #9

Modifica in base a Andrew Optimus Goldheart-

Modifica approvata da Andrew Optimus Goldheart

Prima di
Dopo il
Invariato

Righe Passo

[* black] InsertReheat the plastic opening tool intoiOpener and place it on the gap betweentop edge of the front panel and rear case, nextiPad, over the front-facing camera.
[* icon_caution] Be careful not
to overheat the lower placeholder guitar pick.
[* black] Slide
iOpener during the opening tool aroundrepair procedure. Wait at least two minutes before reheating the corner, separatingiOpener.
[* icon_note] If you have a flexible iOpener, you can bend it to heat both the upper left corner and
the front panel fromupper edge at the rear casesame time.
[* black] InsertReheat the plastic opening tool intoiOpener and place it on the gap betweentop edge of the front panel and rear case, nextiPad, over the front-facing camera.
[* icon_caution] Be careful not
to overheat the lower placeholder guitar pick.
[* black] Slide
iOpener during the opening tool aroundrepair procedure. Wait at least two minutes before reheating the corner, separatingiOpener.
[* icon_note] If you have a flexible iOpener, you can bend it to heat both the upper left corner and
the front panel fromupper edge at the rear casesame time.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Eliminato

Immagine 3

Eliminato