Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #8

Modifica in base a Andrew Optimus Goldheart-

Modifica approvata da Andrew Optimus Goldheart

Prima di
Dopo il
Invariato

Righe Passo

[* black] PlaceTake the iOpener acrossfirst pick you inserted and slide it up toward the bottom ontop corner of the iPad, after reheating it for 30 seconds if it has cooled downiPad.
[* black] Letred] If you can see the iOpener sit for at least 90 seconds, to warm and softentip of the adhesive beneathopening pick through the front glass, don't panic—just pull the pick out a little bit. Most likely, everything will be fine, but try to avoid this section ofas it may deposit adhesive on the front panelof the LCD that is difficult to clean off.
[* black] PlaceTake the iOpener acrossfirst pick you inserted and slide it up toward the bottom ontop corner of the iPad, after reheating it for 30 seconds if it has cooled downiPad.
[* black] Letred] If you can see the iOpener sit for at least 90 seconds, to warm and softentip of the adhesive beneathopening pick through the front glass, don't panic—just pull the pick out a little bit. Most likely, everything will be fine, but try to avoid this section ofas it may deposit adhesive on the front panelof the LCD that is difficult to clean off.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Nessuna immagine precedente.

Aggiunto

Immagine 3

Nessuna immagine precedente.

Aggiunto