Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #4

Modifica in base a Andrew Optimus Goldheart-

Modifica approvata da Andrew Optimus Goldheart

Prima di
Dopo il
Invariato

Righe Passo

[* black] While still pullingholding the glass up with the suction cup, insert a wide plasticslide the point of an opening toolpick into the gap created between the front panelglass and rear casebody of the iPad.
[* icon_caution] Don't insert the opening pick any deeper than the black bezel on the side of the display. Inserting the pick too far may damage the LCD
.
[* black] LeavePull the opening tool insuction cup's plastic nub to release the gapvacuum seal and remove the suction cup from the iPad.
[* black] Unlike in the iPad 2,3, and 4, there is no plastic
display bezel on the iPad Mini. Insert the plastic opening tool into the crack between the front panel and the rear caseassembly.
[* black] While still pullingholding the glass up with the suction cup, insert a wide plasticslide the point of an opening toolpick into the gap created between the front panelglass and rear casebody of the iPad.
[* icon_caution] Don't insert the opening pick any deeper than the black bezel on the side of the display. Inserting the pick too far may damage the LCD
.
[* black] LeavePull the opening tool insuction cup's plastic nub to release the gapvacuum seal and remove the suction cup from the iPad.
[* black] Unlike in the iPad 2,3, and 4, there is no plastic
display bezel on the iPad Mini. Insert the plastic opening tool into the crack between the front panel and the rear caseassembly.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione

Immagine 3

Vecchia Versione

Nuova Versione