Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Andrew Optimus Goldheart-

Modifica approvata da Andrew Optimus Goldheart

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Wedge a PSPplastic opening tool in the location shown in the first picture, and slightly separate the metal frame from the plastic front panel.
[* black] Slide the PSPplastic opening tool around the perimeter of the display, increasing the gap between the metal frame and the front panel.
[* black] Wedge a PSPplastic opening tool in the location shown in the first picture, and slightly separate the metal frame from the plastic front panel.
[* black] Slide the PSPplastic opening tool around the perimeter of the display, increasing the gap between the metal frame and the front panel.
[* icon_caution] The front panel should now be free from the metal frame. However, it is still connected to the frame, so don't remove it completely.