Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche a questo Step

Modifica in base a Jonathan Rosales-

Modifica approvata da Jonathan Rosales

Prima di
Dopo il
Invariato

Righe Passo

[* icon_note] Let your Jeep cool down by leaving it off for 30 minutes. This will prevent burns when you touch the engine area.
[* black] Locate the two grey latches on each side of the hood near the headlights.
[* black]
Pull the latches away from the hood at an angle to release the latches.
[* black] Reach underneath the hood and push up on the lever located in the front center of the hood. You can now open the hood to access the oil filter.
[* black] Locate the two grey latches on each side of the hood near the headlights.
[* black]
Pull the latches away from the hood at an angle to release the latches.
[* black] Reach underneath the hood and push up on the lever located in the front center of the hood. You can now open the hood to access the oil filter.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione

Immagine 3

Nessuna immagine precedente.

Aggiunto