Salta al contenuto principale

Modifiche al passo #7

Modifica in base a Jonathan Turner-

Modifica approvata da Andrew Optimus Goldheart

Prima di
Dopo il
Invariato

Righe Passo

[* black] Once all of the adhesive is loosened, lift the battery up from the bottom and swing it out over the left side of the rear case.
-[* icon_caution] Be careful not to yank it out, as it is soldered to the logic board.
+[* icon_caution] Be sure to yank it out, as it is not soldered to the logic board.
[* black] Flip the battery over to straighten its cable and set it down.