Salta al contenuto principale

Modifiche al passo #7

Modifica in base a Andrew Optimus Goldheart-

Modifica approvata da Andrew Optimus Goldheart

Prima di
Dopo il
Invariato

Righe Passo

-[* black] Insert wisdom here.
+[* black] Once all of the adhesive is loosened, lift the battery up from the bottom and swing it out over the left side of the rear case.
+[* icon_caution] Be careful not to yank it out, as it is soldered to the logic board.
+[* black] Flip the battery over to straighten its cable and set it down.