Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #2

Modifica in base a Sam Goldheart-

Modifica approvata da Sam Goldheart

Eliminato
Aggiunto
Invariato

Righe Passo

[title] Soften* black] Use a hairdryer or [guide|25705|prepare an iOpener|new_window=true] and apply it to the lower edge of the iPod for about a minute in order to soften up the adhesive with hair dryer
[* black
underneath.
[* red
] The bottom of the screen (near the home button) is held in place with strong adhesive.
[* black] Use a heat gun or hair dryer (low setting) to soften the
adhesive.
[title] Soften* black] Use a hairdryer or [guide|25705|prepare an iOpener|new_window=true] and apply it to the lower edge of the iPod for about a minute in order to soften up the adhesive with hair dryer
[* black
underneath.
[* red
] The bottom of the screen (near the home button) is held in place with strong adhesive.
[* black] Use a heat gun or hair dryer (low setting) to soften the
adhesive.
[* black] As you start prying the screen off in the next stages, you may need to apply more heat to keep the glue warm and flexible.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Nessuna immagine precedente.

Aggiunto