Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Justin Williams-

Modifica approvata da Justin Williams

Prima di
Dopo il
Invariato

Righe Passo

-[* black] Once the plastic strip is removed from device, use the T5 torx screwdriver, and remove the 9 T5 Torx screws from the bottom of the device.
+[* black] Carefully peel off the bottom pad to expose the fastening screws.
+[* red] Take note of the location of each screw you remove. There should be three silver 1.4 T5 Torx screws on the top row, one green 1mm T5 Torx screw in the middle. On the bottom row, the second from the left is a black 1.5mm t5 Screw, while the rest are then 3 green 1mm T5 screws. They must be installed as they were removed.