Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Kristen Gismondi-

Modifica approvata da Kristen Gismondi

Prima di
Dopo il
Invariato

Righe Passo

[* black] Carefully peel off the bottom pad to expose the fastening screws.
-[* red] Take note of the location of each screw you remove. There should be three silver 1.4 T5 Torx screws on the top row, one green 1mm T5 Torx screw in the middle. On the bottom row, the second from the left is a black 1.5mm t5 Screw, while the rest are then 3 green 1mm T5 screws. They must be installed as they were removed.
+[* red] Remove three silver 1.4 T5 Torx screws on the top row.
+[* orange] Remove one green 1mm T5 Torx screw in the middle.
+[* yellow] Remove a black 1.5mm T5 screw.
+[* green] Remove three green 1mm T5 screws from the bottom row.

Immagine 2

Vecchia Versione

Nuova Versione