Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Theodore Newman-

Modifica approvata da Theodore Newman

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Pull out and rotate the quick release lever until the axle is loose.
[* black] Pull back on the derailleur and pull offon the left hand side. This would remove the tension holding the rear wheel in place.
[* black] Pull the wheel in a downward motion to remove the
wheel.
[* icon_note] If there is a replacement wheel the bike may not have a quick release. In which case you would need to use the correct wrench size to loosen the axial.
[* black] Pull back on the derailleur and pull offon the left hand side. This would remove the tension holding the rear wheel in place.
[* black] Pull the wheel in a downward motion to remove the
wheel.
[* icon_note] If there is a replacement wheel the bike may not have a quick release. In which case you would need to use the correct wrench size to loosen the axial.