Salta al contenuto principale

Modifiche al passo #6

Modifica di matthew pennell

Modifica approvata da matthew pennell

Prima di
Dopo il
Invariato

Righe Passo

-[* black] Begin tightening the second knut on the side with the chain (usually the left side) with a 14mm
+[* black] Begin tightening the second nut on the side with the chain (usually the left side) with a 14mm
[* icon_note] You should visually see the chain tightening and the sliders moving which marks the chain position
[* black] Tighten to where there is about ½ to ¾ inch of play in the chain.
[* icon_note] Notice the mark of the slider on the side you tightened first
[* black] Tighten the opposite side till the slider is in the same position as the first side you tightened