Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Michael Saggese-

Modifica approvata da Michael Saggese

Eliminato
Aggiunto
Invariato

Righe Passo

[* icon_note] Note the locations of the wires and where they are attached. If you happen to dislodge the wires during removal you will be able to re-attach them upon re-installation.
[* red] Locate and remove the four anchoring screws for the head unit using the #2 screwdriver.
[* black] It is now safe to pull out the head unit and letunit. Support it in hang by its wire harnessone hand to reduce tension in the cables.
[* black] It is now safe to pull out the head unit and letunit. Support it in hang by its wire harnessone hand to reduce tension in the cables.

Immagine 3

Vecchia Versione

Nuova Versione