Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Andrew Bookholt-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Insert wisdom herePress down firmly around the perimeter of the click wheel to separate it from the adhesive securing it to the outer case.
[* icon_note] This requires a good amount of force. Work slowly.
[* icon_note] It may be helpful to use an edged tool to separate the adhesive from the click wheel on the inside of the Nano while pressing it down from the outside.
[* black] Remove the click wheel from the inside of the Nano
.
[* black] Insert wisdom herePress down firmly around the perimeter of the click wheel to separate it from the adhesive securing it to the outer case.
[* icon_note] This requires a good amount of force. Work slowly.
[* icon_note] It may be helpful to use an edged tool to separate the adhesive from the click wheel on the inside of the Nano while pressing it down from the outside.
[* black] Remove the click wheel from the inside of the Nano
.