Modifiche al passo #1
Modifica di Debra Crawford —
Modifica approvata da Debra Crawford
- Prima di
- Dopo il
- Invariato
Righe Passo
| - | [* black] Disconnect the depleted battery from the drone by separating the red and black battery cable from the red and black drone cable. |
|---|---|
| - | [* black] Remove the battery from the drone body by pulling on the silver tab attached to the battery. |
| - | [* black] Obtain a fully charged battery. |
| - | [* black] Insert the charged battery into the cavity found between the camera and the main drone body so the red and black battery cable is sticking out of the drone. |
| - | [* black] Connect the battery cable to the drone cable. |
| + | [* black] Locate the depleted drone battery located in the slot between the drone body and the camera. |
| + | [* black] Disconnect the battery from the drone by separating the red and black battery cable from the red and black drone cable. |
| + | [* black] Remove the battery from the drone body by pulling on the silver tab attached to the outfacing end of the battery. |